本型電流互感器為環氧樹脂真空澆注全封閉支柱式結構， 主要適用於額定頻率為50Hz或60Hz，額定電壓35kV及以下線路中作電能計量和繼電保護用 ， 本k8官网ag旗舰厅由0.2S、 0.2、 0.5、 10P級可任意組合。
本k8官网ag旗舰厅符合GB 20840.1-2010《互感器第1部分：通用技術要求》、 GB 20840.2-2014《互感器第2部分： 電流互感器的補充技術要求》和JJG 313-2010《測量電流互感器檢定規程》。

This type of current transformer adopts epoxy-resin vacuum casting and fully enclosed post structure, is applicable for power systems of rated frequency 50Hz or 60Hz and rated voltage up to and including 35kV, used for electric energy metering, cu『rent measurement and relay protection, it can be an arbitrary combination of classes 0.2S, 0.2, 0.5 and 10P.
It complies with the standards GB 20840.1-2010 Instrument transformers-Part 1: General requirements, GB 20840.2-2014 Instrument transformers-Part 2: Additional requi『ements for current transformers. and JJG 313-2010 Instrument Current Transformers.

1、海拔：不超過1000米；
2、環境溫度：－5℃～＋40℃；
3、空氣相對濕度：≤85%；
4、安裝場所：戶內。

1.Altitude should not exceed 1000m;
2.Ambient temperature: -5℃～＋40℃；
3.Air relative humidity：≤85%;
4. Installation site: outdoors。

1. Insulation level: 40.5/95/200kV ;
2. Power factor: cosφ＝0.8 (lag)；
3.Rated secondary current: 5A or 1A,；
4.Rated frequency: 50Hz or 60Hz；
5.Weight: 112kg.